Instrumentation & control technicians Work, Jobs in Daventry, Nth (with Salaries)

Calibration Technician
Lisi Aerospace —Rugby
- £40,175.27 a year
- 12 hour shift
- Microsoft Word
- Continuous improvement
- In-person
Quick apply
7d
Service & Support Technician
Unison Ltd —Kenilworth
- Overtime
- Hybrid work
- Spanish
- Writing skills
- Travel
Quick apply
14d
Maintenance Engineer (Electrical)
PepsiCo —Coventry
- £57,924.07 a year
- 12 hour shift
- Maintenance
- Continuous improvement
- Relocation assistance
- Employee discount
Automation Maintenance Technician
Bleckmann —Crick
- £36,000 - £38,610 a year
- Full-time
- Schematics
- Maintenance
- Programmable logic controllers
- Annual leave
- Employee assistance programme
Quick apply
Calibration Engineer
Horiba UK Ltd —Northampton
- £31,600 - £36,500 a year
- Full-time
- Schematics
- Maintenance
- Programmable logic controllers
- Life insurance
- Sick pay
Quick apply
2d
Electronics Hardware Calibration Technician
Cadillac Formula 1® Team —Silverstone
- Full-time
- Engineering
- Data analysis skills
- Communication skills
- Annual leave
Quick apply
Automation Maintenance Employee
Bleckmann Solutions UK Ltd —Crick
- Up to £38,610 a year
- Full-time
- Maintenance
- Continuous improvement
- Communication skills
- Annual leave
- Employee assistance programme
Quick apply
Engineers
Saputo Inc. —Nuneaton
- £57,371 a year
- Full-time
- Maintenance
- Programmable logic controllers
- Free parking
- Employee discount
Service Engineer/Technician
Buehler An ITW Company —Coventry
- Full-time
- Maintenance
- Mechanical knowledge
Electrical Maintenance Technician - Bioresources
Anglian Water Services Ltd —Milton Keynes
- £49,780 - £57,000 a year
- Overtime
- Annual leave
Control Systems Specialist
PepsiCo —Coventry
- Programmable logic controllers
Engineering Technician
MacGregor Black —Milton Keynes
- £62,000 a year
- Full-time
- Maintenance
- Continuous improvement
- Health & wellbeing programme
- Employee discount
Quick apply
2d
Service Automation & BMS Project Engineer
Systems adi Group Limited —Towcester
- Full-time
- Programmable logic controllers
- Continuous improvement
- Software development
- Employee assistance programme
- Employee discount
Automation Engineer, EMA5 RME
Amazon UK Services Ltd. —Kettering
- Full-time
- Engineering
- English
- Programmable logic controllers
Automation Maintenance Engineer
James and James Fulfilment Ltd. —Northampton
- £40,000 - £50,000 a year
- Full-time
- Schematics
- Maintenance
- Hand tools
- Sick pay
Quick apply
UK Fives Service Technician (Fives Conveying)
Fives Conveying —Coventry
- Call to connect
- Maintenance
- Business development
- Continuous improvement
Quick apply
9d
Maintenance Engineer (Banbury)
Powerline Electric Motors —Banbury
- £40,000 - £50,000 a year
- Full-time
- Hybrid work
- Computer literacy
- Maintenance
- Programmable logic controllers
- Profit sharing
- Bereavement leave
Quick apply
13d
Field Service Engineer
VLT —Buckingham
- Full-time
- English
- In-person
- Time management
Quick apply
Automation Maintenance Technician
Royal Mail Group —Crick
- From £54,791 a year
- 8 hour shift
- Continuous improvement
- Travel
- Annual leave
Team Leader PLC Technical Specialist
Tgw Group —Market Harborough
- Schematics
- Programmable logic controllers
- Continuous improvement
Quick apply

I want to receive the latest job alerts for instrumentation & control technicians in daventry, nth

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

instrumentation & control technicians jobs near daventry, nth

Calibration Technician

Lisi Aerospace
Rugby

Quick apply

Job details

Permanent | Full-time
£40,175.27 a year
7 days ago

Benefits

Cycle to work scheme
Company pension
Canteen
Company events
On-site parking

Qualifications

Microsoft Word
Driving Licence
GCSE
Microsoft Office Suite
Quality assurance
Continuous improvement
Site housekeeping
Manufacturing
Instrumentation calibration
Communication skills
Mechanical knowledge

Full job description

Calibration Technician

Grade 3 | Full Time | Day Shift | 4 on, 4 off | 12 Hour Shifts
Location: Rugby, Warwickshire
Department: Quality Assurance
Shift Pattern: 4 on, 4 off (12-hour shifts)

About the Role

We are looking for a highly motivated Calibration Technician to join our Quality Assurance team. This is an excellent opportunity for someone with experience in calibration and measurement systems who enjoys working in a precision-focused manufacturing environment.

The successful candidate will be responsible for ensuring the calibration, verification, control, and maintenance of monitoring and measuring equipment across the site. The role also supports pyrometry activities in accordance with AMS2750, helping to maintain compliance with customer, industry, and regulatory requirements.

Key Responsibilities

Calibration & Measurement Equipment

Perform internal calibration and verification of measuring and test equipment.
Ensure all equipment remains traceable to national and international standards.
Manage the identification, issue, status, and recall of calibrated equipment.
Maintain accurate calibration records using the company calibration management system.
Investigate out-of-calibration equipment and support impact assessments.
Support Measurement System Analysis (MSA) activities, including Gauge R&R studies.
Manage stock levels of measuring and test equipment and raise purchase orders when required.

External Calibration

Coordinate external calibration, repair, and maintenance activities with approved suppliers.
Review calibration certificates for compliance, traceability, and acceptance.
Raise purchase order requests relating to external calibration activities.

Pyrometry

Carry out pyrometry activities in support of special process operations.
Conduct System Accuracy Tests (SATs) on furnaces and instrumentation.
Complete Temperature Uniformity Surveys (TUS).
Maintain pyrometry records and support compliance during NADCAP audits.

Continuous Improvement & Compliance

Support AS9100, customer, and NADCAP audits.
Provide calibration records and technical expertise during audits.
Participate in continuous improvement activities relating to measurement systems and calibration processes.
Maintain high standards of housekeeping within the calibration department.

What We're Looking For

Essential

Experience using calibration techniques for gauges and measurement systems.
Previous experience within a manufacturing environment.
Good working knowledge of Microsoft Office, including Excel, Word, and Outlook.
Strong understanding of technical operations and processes.
GCSE Maths and English (or equivalent).
Excellent communication and problem-solving skills.
Ability to work independently and as part of a team.

Desirable

Introduction to Pyrometry (AMS2750) qualification.
Knowledge of heat treatment processes, pyrometry, and furnace surveys to AMS2750.
Experience with Measurement Systems Analysis and Gauge R&R studies.

What You'll Bring

A proactive and safety-focused approach.
Strong attention to detail and accuracy.
Excellent interpersonal skills.
A process-driven, data-based approach to problem solving.
Customer-focused mindset with the confidence to use initiative and resolve issues effectively.

Why Join Us?

You'll be joining a business that values quality, continuous improvement, and employee development. This role offers the opportunity to work with specialist measurement and calibration systems while supporting critical manufacturing and quality processes.

At LISI, we are committed to creating an inclusive and diverse workplace where all individuals are valued and respected. We believe that a variety of perspectives leads to innovation and success. We welcome applications from people of all backgrounds, regardless of race, ethnicity, gender, sexual orientation, disability, religion, or age. We are proud to be an equal opportunity employer and strive to create an environment where everyone can thrive and contribute their best.

Apply today to become part of our Quality Assurance team and help ensure the highest standards of accuracy, compliance, and performance.

Pay: £40,175.27 per year

Benefits:

Canteen
Company events
Company pension
Cycle to work scheme
On-site parking

Application question(s):

Do you have a Introduction to Pyrometry (AMS2750) qualification?

Education:

GCSE or equivalent (required)

Experience:

Manufacturing: 1 year (required)

Licence/Certification:

Driving Licence (required)

Work authorisation:

United Kingdom (required)

Location:

Rugby CV21 3RQ (preferred)

Work Location: In person

Quick apply

Refine Your Search

instrumentation & control technicians jobs in daventry, nth

Calibration Technician

Service & Support Technician

Maintenance Engineer (Electrical)

Automation Maintenance Technician

Calibration Engineer

Electronics Hardware Calibration Technician

Automation Maintenance Employee

Engineers

Service Engineer/Technician

Electrical Maintenance Technician - Bioresources

Control Systems Specialist

Engineering Technician

Service Automation & BMS Project Engineer

Automation Engineer, EMA5 RME

Automation Maintenance Engineer

UK Fives Service Technician (Fives Conveying)

Maintenance Engineer (Banbury)

Field Service Engineer

Automation Maintenance Technician

Team Leader PLC Technical Specialist

I want to receive the latest job alerts for instrumentation & control technicians in daventry, nth

Explore jobs in more locations

Jobseeker tools

Employer Tools

Browse

Stay Connected